 |
|
|
Scheduled Research Launch Attendance
|
|
|
|
The Official Magazine of Tripoli Rocketry Association
|
|
|
|
|
Originally a 76-6000Ns case. Now a 76-4800Ns case.
|
|
|
|
|
|
|
|
Snap ring grooves are machined with a chamfered edge on the inside of the groove. The helps to prevent bulkhead or nozzle o-ring damage during installation.
This does not affect the snap rings ability to hold pressure.
|
|
|
|
|
|
|
Restore your case to like new condition, for less than half the price of a new one!
|
|
|
|
|
|
Includes:
(1) OD/ID cleaning, inspection and measurement.
(2) Cut to length to your recommended geometry.
(3) Face end/s and cut all groove/s needed.
(4) Fitted with new internal snap ring/s.
(5) Return shipping is included
External retaining ring not included and is an optional cost.
|
|
|
|
|
|
|
|
Cut Length
|
5- 11.9
|
12.0- 18
|
18.1 - 24
|
24.1- 29.9
|
30- 36
|
36.1 - 50
|
|
38mm
|
|
$30
|
$32
|
$40
|
$45
|
Contact for price
|
|
54mm
|
$30
|
$48
|
$53
|
$65
|
$74
|
Contact for price
|
|
76mm
|
$30
|
$58
|
$69
|
$79
|
$87
|
Contact for price
|
|
98mm
|
|
$69
|
$77
|
$83
|
$93
|
Contact for price
|
|
|
|
|
|
*Cases with stuck liners, nozzles, bulkheads may incur an additional removal charge.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Kosdon forward closure w/out liner shoulder.
Machine liner shoulder up to original oring groove. Machine 2nd oring groove forward.
|
|
|
|
|
$10 includes oring
24-29mm $8.00
|
|
|
|
|
Kosdon nozzles w/out liner shoulder.
Machine liner shoulder.
|
|
|
|
|
$5.00
|
|
|
|
|
Commercial smoke forward closures with or without internal o-ring.
Machine internal snap ring groove. Uses standard snap ring. Better retention.
|
|
|
|
$10 includes snap ring
98mm $15.00
|
|
|
|
|
|
TRU-CORE All rights reserved 2009-10
|
|
